1. Turning principle of quadruped robot
When a quadruped robot turns while moving, its body must make circular motion around the turning center to maintain the balance and stability of the body, while ensuring the correct direction of the robot. This requires the quadruped robot to achieve gait control and steering wheel control.
2. Steering method of quadruped robot
1. Gait control method
The gait control method of quadruped robot is a basic way to achieve its steering, which is completed by changing the gait of the robot's limbs. Specifically, when the quadruped robot is moving, it controls the phase difference between the hind limbs and the forelimbs to rotate its body to a specified angle, and then adjusts the gait to maintain balance and move in the specified direction.
2. Steering wheel control method
The quadruped robot can also turn in a control method similar to the steering wheel of a car. By controlling the steering wheel of the robot to stop the adjacent legs on one side from stepping forward, the adjacent legs on the next side can take steps in a shorter time, thereby achieving steering.
3. Steering technology of quadruped robots
1. Coordination control technology
In order to realize the steering operation of quadruped robots, coordination control technology is needed. On the one hand, by controlling the leg movements of the robot, it can complete the turning operation; on the other hand, by controlling the movements of other joints, it can maintain balance and cooperate with the turning operation.
2. Posture estimation technology
Quadruped robots need to maintain balance when turning, and it is very important to judge the posture state of the robot in real time. Through posture estimation technology, the body posture of the robot can be obtained in real time, and the posture control parameters can be adjusted in time to ensure the stability and reliability of the robot during movement.
