1. The switch position of the robot dog
The switch of the robot dog is usually located on the side, back or abdomen of its body. The switch position of the robot dog of different brands and models may be different, and specific analysis is required. Generally speaking, the switch of the robot dog will be marked as "ON", "OFF" or marked with "|" and "O".
2. How to use the robot dog
1. After turning on the robot dog switch, press the sensor on the back or head of the robot dog with your fingertips to start the sensing mode of the robot dog, or make it shake its head and tail, make sounds, etc.
2. If you need to make the robot dog move, you can use the remote control or APP to control it. To use the remote control, you need to first successfully pair the remote control with the robot dog, and then use the remote control to operate according to the instructions in the manual. To use APP control, you need to connect the robot dog and the mobile phone to the same Wi-Fi network, download the corresponding APP on the mobile phone, and then control it through the APP.
3. When controlling the robot dog to move, you need to pay attention that the robot dog will automatically stop moving when it encounters an obstacle or reaches the edge. At this time, you need to adjust the direction or use the remote control to re-operate.
4. When the robot dog is low on power, it will emit a "beep beep" prompt sound. At this time, you need to connect the robot dog to the charger for charging. During charging, you need to ensure that the charger and the robot dog power switches are turned off.
