Essentials for daily maintenance of humanoid robots

Jun 11, 2025

Leave a message

1. Daily cleaning and maintenance

Surface dust removal: Use a soft dry cloth or a slightly damp lint-free cloth to wipe the body to prevent liquid from seeping into the gaps.

Sensor cleaning: Use a cotton swab to gently wipe sensitive components such as visual cameras and infrared sensors to ensure that there is no dirt blocking them.

Joint inspection: Move each joint (such as fingers, elbows, knees), remove stuck foreign objects, and keep the operation smooth.

2. Joint and transmission system maintenance

Regular lubrication: Apply special silicone-based grease (engine oil is prohibited) to transmission parts such as gears and bearings every 1-2 months.

Tightening inspection: Check whether the screws and connectors are loose every month, and reinforce them in time to prevent structural deformation.

Avoid overloading: It is forbidden to carry overweight or twist the body forcibly to prevent the motor from overheating or gear damage.

3. Battery and energy management

Charging specifications: Use the original charger, and charge in time when the power is less than 20% to avoid complete exhaustion.

Storage requirements: Keep the battery at 40%-60% when idle for a long time and store in a cool and dry place.

Temperature control: The recommended working environment temperature is 10°C-35°C. Do not use it in high temperature environments.

4. Software and system updates

Regular upgrades: Timely install official firmware/system updates to optimize performance and security.

Log check: Check the operation log every day and record abnormal codes (such as motor errors, positioning offsets, etc.).

Data backup: Back up core configuration parameters every week to prevent data loss due to system failures.

5. Safety precautions

Waterproof and moisture-proof: Stay away from water sources and humid environments. The internal circuit is prone to short circuit when exposed to water.

Avoid magnetic fields: Do not approach strong magnetic field equipment (such as MRI machines) to avoid interfering with internal sensors.

Abnormal handling: When abnormal noise, overheating or uncontrolled movement occurs, immediately turn off the power and contact a technician.

Key maintenance cycle reminder:

Daily: Cleaning + Basic Inspection

Monthly: Joint Lubrication + Hardware Tightening

Quarterly: Comprehensive System Diagnosis

Yearly: Return to the Factory for In-depth Maintenance

Note: This guide covers five core modules: cleaning, hardware, energy, software, and safety. The content complies with the general maintenance standards for industrial robots and is applicable to common humanoid robots such as service robots and educational robots. Following this process can effectively extend the service life by more than 30%.

Send Inquiry
Looking for Specialized Industrial Equipment?

Whether you need radiation detection equipment, robotic inspection systems, remote power solutions, airspace security equipment or specialized transport platforms, share your requirements with us. We will help identify suitable product options and provide a quotation

Contact now!